Bond It Bitumen Primer

In Stock
£8.56 inc. VAT


Same Day Dispatch If Ordered Before 1pm

Colour – BLACK

Size – 1 Litre

In stock

Bond It Bitumen Primer BLACK 1L

Bond It Bitumen Primer is highly penetrative, bituminous priming solution.

A quality grade, highly penetrative, bituminous solution for priming surfaces prior to the application of bituminous materials and flashing tapes. Heavy duty formula making it suitable to prime concrete roofs and floors, cementitious screeds/renders, bitumen felt, weathered bitumen, mastic asphalt, weathered, corrugated iron and steel.

All surfaces must be structurally sound, clean, dry and free from surface contaminants such as grease, rust and dirt. If necessary, remove any organic growth i.e. moss or lichen, with a fungicidal wash such as Mould Stop. On bare metal a rust inhibiting product, such as red oxide or zinc phosphate should be applied and allowed to harden.

Apply by brush or roller. Using a brush, scrub the primer into the surface. Ensure that only a thin coat is applied and that there is no pooling. Priming should extend at least 75mm beyond the area to be waterproofed. Leave to dry for 2­3 hours before continuing with further work. With fibre cement or dry rag based bituminous felts, apply generously to saturate the surface.

Drying Time
Approximately 3­6 hours depending on drying conditions. May be extended for heavy coatings or in cold weather.


   Bond It Primer Data Sheet

  Bond It Bitumen Primer Safety Data Sheet

PDF  Delivery Options